4100-OHA Conveyorized Automatic Pallet Wrapper
Rotary Arm Wrapper
Cousins designed this straightforward conveyor system to allow you to specify the features needed for your wrapping solution.
As a rotary arm wrapping machine, the 4100-OHA Conveyorized Automatic Pallet Wrapper suits loads that cannot hold up to rotation. Its conveyor-based design can integrate into existing production and distribution systems.
Automatic Features
Pneumatically actuated film clamp mechanism
Pneumatically actuated film tail cut/wiper arm mechanism
Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle
Control Features
PANASONIC FP-X Programmable Logic Controller (PLC) AB Controller available
HMI Touchscreen Operator Interface Panel
Illuminated Power Start / Reset button
Emergency Stop button
Wrap Cycle Start (rewrap) button
Manual controls provided for rotary arm jog, film carriage elevator lower/raise, film clamp open/close and conveyors forward/reverse
Wrap Bypass mode selector switch
Separate film carriage elevator raise & lower speed controls
Film tension (Force-to-Load) control
Separate 1 to 12 revolution top & bottom wrap control
Triple beam auto load height sensing photo-eye detects dark or shiny loads
Broken film/out of film detection c/w automatic machine reset and fault beacon light
Rotary arm and film carriage elevator dynamic braking
NEMA 12 control panel and junction boxes
Dust-tight slip ring assembly
All structural steel construction
Structural tube machine tower and frame
Electro-static powder-coated paint finish
Non-proprietary UL/CSA approved components
Safety Features
Personnel Safety – Rotary Arm Obstruction Emergency Stop Sensor
Wire mesh safety barriers enclose the wrap zone to prevent personnel intrusion
Operator Access Gates c/w Safety Interlock Switches disable machine operation when gate(s) opened
Hard-wired emergency stop and operator access gate circuits with Category 3 dual-channel safety relays