Model ERX-15 Automatic Case Erector
Ideal Alternative to Manual Case Forming
The ERX-15 Case Erector from Eastey is designed to automatically erect and seal the bottom of your cases at production rates up to 15 cases per minute. The ERX-15 is designed to keep production and maintenance efforts at a minimum while providing fast, efficient case erecting, making the ERX-15 an ideal alternative to manual case forming.
The ERX-15 Case Erector enables a single operator to form, seal, and pack corrugated cases. Operation is simple: load up to 200 cases in the case magazine hopper and set your operation to run or jog mode. Separators release the leading blank case where a series of eight vacuum suction cups hold the case in a properly formed square position. After a set of stationary flap folding bars fold both minor and major bottom flaps, the case is then transitioned and the bottom is sealed with Eastey’s proven EX tape head.
The versatile design of the ERX-15 allows operators the flexibility of making adjustments on the fly without tools and easy-to-use hand tighten knobs and cranks. Need to switch case sizes? No problem, case changeover is completed in minutes for a wide range of cases as large as 19.5” in length, 19.5” in height, and 15.5” in width.
Features
Touchscreen human interface control panel
Powered case magazine hopper holds up to 200 cases
Square case erecting and transition area
Quick and easy changeover requires no tools – 5 easy steps
Low tape and low case alarm light
E-Stop and interlock guarding for safety
Heavy-duty steel construction
Optional 3” tape head available
Up to 15 cases a minute
Case Hopper Capacity – 150-200 cases